Supply & installation in Bhiwadi
School swings with strong frames, safe seats and layouts that keep swinging children away from busy paths.
- Made at our works in Faridabad, Haryana
- Installed on site by our technicians
- Supplied across Delhi NCR and North India
- Sizes and colours planned to suit your site
Factory-Direct Rate • IS 9873 / EN 1176 Certified • Fast North India Dispatch
School Swings for schools, parks and societies in Bhiwadi
Looking for school swings manufacturers supplying Bhiwadi? Nagpal Engineering & Sports is an original manufacturer with our works located in Faridabad, Haryana (Dabua Pali Road). While our manufacturing plant is in Faridabad, we directly supply and install school swings for schools, RWAs, and municipal parks across Bhiwadi, Rajasthan at direct factory rates.
Buying factory-direct from our Faridabad works saves you middleman commissions while ensuring certified heavy-gauge steel, UV-stabilised virgin LLDPE plastics, and professional on-site concrete foundation erection by our factory technicians in Bhiwadi.
Supply & Installation in Bhiwadi
Transit Corridor: ~75 km via KMP Expressway & Dharuhera-Bhiwadi bypass (2 hours direct factory dispatch).
Engineering Soil & Weather Profile: Industrial housing societies and worker residential complex play areas.
Buying in Bhiwadi
Bhiwadi is in the NCR industrial hub just 75 km from our plant via the KMP expressway. Industrial township housing and private schools benefit from fast same-day dispatch and technician installation.
School Swings for this climate
Metal seats get very hot in strong sun, so rubber or belt seats are the better choice, and placing swings where they get afternoon shade helps.
Planning for Rajasthan
Rajasthan sites get strong sun for most of the year, so we suggest UV-stabilised LLDPE or FRP for slides and seats, lighter colours that stay cooler to touch, and shade for waiting areas. Sandy ground needs deeper concrete footings for swings and climbers.
Before you order school swings
Before ordering School Swings, verify your available clear ground space to ensure adequate safety clearance around the apparatus. Confirm the primary age group of the children who will use the equipment to select the appropriate platform elevation. Inspect site levels and plan for adequate rainwater drainage around the footing area. Determine whether you will install interlocking rubber safety tiles, turf or concrete under the play zone, and share preliminary site photos for layout verification.
Supplied near Bhiwadi
- Army Public School, Alwar
- Avalon Rangoli, Bhiwadi
School Swings in nearby areas:
Playground Swings types we supply in Bhiwadi
About our school swings
In a school, swings are used by one child after another all through break time. Our school swings have heavy frames, chains with limited pinch points and seats that suit the class using them. We place them at the edge of the play area so other children do not run across the swing path.
Features of the school swings
- Separate frames for junior and senior classes
- Placed away from running paths
- Seats with limited pinch points
- Made at our Faridabad works
- Delivered and installed by our own team
School Swings is fabricated for heavy daily service across school grounds, public sector parks, and housing society play areas. Designed to encourage active outdoor movement and social recreation, this apparatus provides children with structured physical play. Outdoor playground swings offer traditional rhythmic swinging play with heavy-duty A-frame pipe posts, heavy-gauge link chains and self-lubricating ball bearing swing hangers. Each structural component is engineered to withstand continuous footfall while maintaining steady mechanical stability. In a school, swings are used by one child after another all through break time. Our school swings have heavy frames, chains with limited pinch points and seats that suit the class using them.
Manufacturing begins with heavy-duty Class B galvanised iron pipes conforming to IS 1239 and IS 1161 standards, with nominal wall thicknesses ranging from 2.5 mm to 3.2 mm. Plastic decks, hoods, and slide beds are rotomolded from 100% virgin food-grade LLDPE polymer compounded with UV-12 ultraviolet stabilizers to resist sun embrittlement and color fading. Metal joints undergo precision MIG welding, while structural fasteners are manufactured from Grade 304 stainless steel fitted with protective molded nylon caps to prevent scratching.
Surface finishing utilizes an automated seven-tank chemical pre-treatment cycle consisting of alkaline degreasing, water rinsing, derusting, and zinc phosphating. Steel members are then coated with electrostatic pure polyester powder and oven-baked at 200 degrees Celsius to achieve a durable 60 to 80 micron protective layer. This industrial coating system resists moisture penetration, chipping, corrosion, and high outdoor ambient temperatures during intense summer conditions.
Child safety design conforms to IS 9873 and European EN 1176 design principles. All accessible edges are rounded with generous safety radii, handrails are positioned at ergonomic gripping heights, and structural platforms include anti-slip vinyl decks. Permanent site installation requires casting vertical load-bearing posts into M20 grade concrete foundation footings. A clear perimeter safety fall zone of Clear swing path clearance equal to twice the top beam height front and rear should be maintained around the entire operational footprint.
Routine upkeep includes monthly inspections of fastener tightness, bearing smoothness, and foundation anchor integrity. Plastic components and coated steel surfaces can be washed down with clean water to remove accumulated playground dust. Because all fabrication takes place at our primary works on Dabua Pali Road in Faridabad, original replacement parts, spare hardware, and technician repair support remain readily accessible throughout the operational life of the equipment.
| Material | Heavy-duty Class B GI pipe A-frames (50mm to 65mm NB) with sealed ball bearing hangers |
|---|---|
| Age group | 3 to 14 years (toddler cradle bucket seats available for pre-school ages) |
| Sizes / heights | 2-seater and 4-seater configurations, frame height 8 ft to 10 ft |
| Finish | Electrostatic powder coating over zinc phosphate base coat |
| Installation | Cast-in-place concrete foundation blocks with anti-wrap hanger assemblies |
| Safety zone | Clear swing path clearance equal to twice the top beam height front and rear |
| Made at | Our works, Dabua Pali Road, Faridabad |
Watch: School Swings we supply in Bhiwadi
Playground Swing
A playground swing set made at our Faridabad works....
Watch DemonstrationSwings and Slides for a Kids Play Area
Swings, slides and a multiplay unit in a finished kids play area....
Watch DemonstrationYou may also need
FAQ
Questions about school swings in Bhiwadi
We build School Swings using Class B galvanised iron pipes conforming to IS 1239 specifications, paired with UV-stabilised virgin food-grade LLDPE plastics or heavy-duty FRP. All structural joints feature precision MIG welding, and connections are secured with tamper-proof Grade 304 stainless steel hardware with protective nylon caps.
Installation requires casting vertical support posts into M20 grade concrete foundation blocks at specified depths. The site must be leveled with adequate drainage slope to prevent waterlogging around base plates. A clear fall perimeter should be preserved around the equipment with suitable rubber tiles or impact surfacing.
Steel components undergo a seven-tank chemical pre-treatment and pure polyester powder coating cured at 200 degrees Celsius to resist rust and outdoor weathering. Polymer components incorporate UV-12 stabilizers to prevent cracking and color fading under intense sunlight, ensuring a long operational service life.
We recommend monthly inspections to verify bolt tightness, inspect pivot points, and ensure foundation anchoring remains solid. Moving parts should be lubricated periodically, and play surfaces can be washed with clean water. Original replacement components are readily supplied from our primary manufacturing facility.
Yes. School Swings for Bhiwadi, Rajasthan are made at our Faridabad works, delivered to your site and installed by our technicians. Tell us the site address and quantity and we include transport and installation in the quotation.
The approximate space available, the age group of the children, the number of pieces and the site location in Bhiwadi. Photos of the site on WhatsApp help us suggest the right models.
It depends on class strength. Most schools start with one double swing for each wing and add more as needed.
2 years and above (cradle seats for under 4s, flat seats for older children). Municipal parks, schools, play schools and housing societies are our usual buyers for this range.
Quick enquiry
Get Factory Price List & Quotation for Bhiwadi
Direct supply from our Faridabad manufacturing works. Save 25-30% on distributor margins with complete on-site installation across North India.
Talk to us directly
- WhatsAppSend photos of your site
- Emailnagpalengg@gmail.com
- Office1/D/3A, Near Hardware Chowk, N.I.T, Faridabad Haryana India - 121001