Circular Swing

Supply & installation in Bhiwadi

Circular swings with a round seat that several children can share, also good for children who need more support.

  • Made at our works in Faridabad, Haryana
  • Installed on site by our technicians
  • Supplied across Delhi NCR and North India
  • Sizes and colours planned to suit your site
WhatsApp Catalog

Factory-Direct Rate • IS 9873 / EN 1176 Certified • Fast North India Dispatch

Circular Swing for schools, parks and societies in Bhiwadi

Looking for circular swing manufacturers supplying Bhiwadi? Nagpal Engineering & Sports is an original manufacturer with our works located in Faridabad, Haryana (Dabua Pali Road). While our manufacturing plant is in Faridabad, we directly supply and install circular swing for schools, RWAs, and municipal parks across Bhiwadi, Rajasthan at direct factory rates.

Buying factory-direct from our Faridabad works saves you middleman commissions while ensuring certified heavy-gauge steel, UV-stabilised virgin LLDPE plastics, and professional on-site concrete foundation erection by our factory technicians in Bhiwadi.

Supply & Installation in Bhiwadi

Transit Corridor: ~75 km via KMP Expressway & Dharuhera-Bhiwadi bypass (2 hours direct factory dispatch).

Engineering Soil & Weather Profile: Industrial housing societies and worker residential complex play areas.

Buying in Bhiwadi

Bhiwadi is in the NCR industrial hub just 75 km from our plant via the KMP expressway. Industrial township housing and private schools benefit from fast same-day dispatch and technician installation.

Circular Swing for this climate

Metal seats get very hot in strong sun, so rubber or belt seats are the better choice, and placing swings where they get afternoon shade helps.

Planning for Rajasthan

Rajasthan sites get strong sun for most of the year, so we suggest UV-stabilised LLDPE or FRP for slides and seats, lighter colours that stay cooler to touch, and shade for waiting areas. Sandy ground needs deeper concrete footings for swings and climbers.

Before you order circular swing

Before ordering Circular Swing, verify your available clear ground space to ensure adequate safety clearance around the apparatus. Confirm the primary age group of the children who will use the equipment to select the appropriate platform elevation. Inspect site levels and plan for adequate rainwater drainage around the footing area. Determine whether you will install interlocking rubber safety tiles, turf or concrete under the play zone, and share preliminary site photos for layout verification.

Supplied near Bhiwadi

  • Army Public School, Alwar
  • Avalon Rangoli, Bhiwadi

Circular Swing in nearby areas:

Playground Swings types we supply in Bhiwadi

About our circular swing

A circular swing has a large round seat, usually a padded ring or rope web, hanging from three or four points. Several children can sit or lie on it together, and it gives good support to children who find a normal seat hard to use. It is one of the most social pieces in a play area.

Features of the circular swing

  • Large round seat for several children
  • Supportive for less confident children
  • Gentle, wide swinging arc
  • Made at our Faridabad works
  • Delivered and installed by our own team

Circular Swing is fabricated for heavy daily service across school grounds, public sector parks, and housing society play areas. Designed to encourage active outdoor movement and social recreation, this apparatus provides children with structured physical play. Outdoor playground swings offer traditional rhythmic swinging play with heavy-duty A-frame pipe posts, heavy-gauge link chains and self-lubricating ball bearing swing hangers. Each structural component is engineered to withstand continuous footfall while maintaining steady mechanical stability. A circular swing has a large round seat, usually a padded ring or rope web, hanging from three or four points. Several children can sit or lie on it together, and it gives good support to children who find a normal seat hard to use.

Manufacturing begins with heavy-duty Class B galvanised iron pipes conforming to IS 1239 and IS 1161 standards, with nominal wall thicknesses ranging from 2.5 mm to 3.2 mm. Plastic decks, hoods, and slide beds are rotomolded from 100% virgin food-grade LLDPE polymer compounded with UV-12 ultraviolet stabilizers to resist sun embrittlement and color fading. Metal joints undergo precision MIG welding, while structural fasteners are manufactured from Grade 304 stainless steel fitted with protective molded nylon caps to prevent scratching.

Surface finishing utilizes an automated seven-tank chemical pre-treatment cycle consisting of alkaline degreasing, water rinsing, derusting, and zinc phosphating. Steel members are then coated with electrostatic pure polyester powder and oven-baked at 200 degrees Celsius to achieve a durable 60 to 80 micron protective layer. This industrial coating system resists moisture penetration, chipping, corrosion, and high outdoor ambient temperatures during intense summer conditions.

Child safety design conforms to IS 9873 and European EN 1176 design principles. All accessible edges are rounded with generous safety radii, handrails are positioned at ergonomic gripping heights, and structural platforms include anti-slip vinyl decks. Permanent site installation requires casting vertical load-bearing posts into M20 grade concrete foundation footings. A clear perimeter safety fall zone of Clear swing path clearance equal to twice the top beam height front and rear should be maintained around the entire operational footprint.

Routine upkeep includes monthly inspections of fastener tightness, bearing smoothness, and foundation anchor integrity. Plastic components and coated steel surfaces can be washed down with clean water to remove accumulated playground dust. Because all fabrication takes place at our primary works on Dabua Pali Road in Faridabad, original replacement parts, spare hardware, and technician repair support remain readily accessible throughout the operational life of the equipment.

MaterialHeavy-duty Class B GI pipe A-frames (50mm to 65mm NB) with sealed ball bearing hangers
Age group3 to 14 years (toddler cradle bucket seats available for pre-school ages)
Sizes / heights2-seater and 4-seater configurations, frame height 8 ft to 10 ft
FinishElectrostatic powder coating over zinc phosphate base coat
InstallationCast-in-place concrete foundation blocks with anti-wrap hanger assemblies
Safety zoneClear swing path clearance equal to twice the top beam height front and rear
Made atOur works, Dabua Pali Road, Faridabad

Full guide to circular swing: materials, planning and FAQs

Watch: Circular Swing we supply in Bhiwadi

Video Tour

Playground Swing

A playground swing set made at our Faridabad works....

Watch Demonstration

See all our videos

You may also need

FAQ

Questions about circular swing in Bhiwadi

We build Circular Swing using Class B galvanised iron pipes conforming to IS 1239 specifications, paired with UV-stabilised virgin food-grade LLDPE plastics or heavy-duty FRP. All structural joints feature precision MIG welding, and connections are secured with tamper-proof Grade 304 stainless steel hardware with protective nylon caps.

Installation requires casting vertical support posts into M20 grade concrete foundation blocks at specified depths. The site must be leveled with adequate drainage slope to prevent waterlogging around base plates. A clear fall perimeter should be preserved around the equipment with suitable rubber tiles or impact surfacing.

Steel components undergo a seven-tank chemical pre-treatment and pure polyester powder coating cured at 200 degrees Celsius to resist rust and outdoor weathering. Polymer components incorporate UV-12 stabilizers to prevent cracking and color fading under intense sunlight, ensuring a long operational service life.

We recommend monthly inspections to verify bolt tightness, inspect pivot points, and ensure foundation anchoring remains solid. Moving parts should be lubricated periodically, and play surfaces can be washed with clean water. Original replacement components are readily supplied from our primary manufacturing facility.

Yes. Circular Swing for Bhiwadi, Rajasthan are made at our Faridabad works, delivered to your site and installed by our technicians. Tell us the site address and quantity and we include transport and installation in the quotation.

The approximate space available, the age group of the children, the number of pieces and the site location in Bhiwadi. Photos of the site on WhatsApp help us suggest the right models.

Usually three or four small children, depending on seat size. We confirm the load with each model.

2 years and above (cradle seats for under 4s, flat seats for older children). Municipal parks, schools, play schools and housing societies are our usual buyers for this range.

Quick enquiry

Get Factory Price List & Quotation for Bhiwadi

Direct supply from our Faridabad manufacturing works. Save 25-30% on distributor margins with complete on-site installation across North India.

Enquiry for

Talk to us directly

Map of states supplied by Nagpal Engineering & Sports